Simple Methods To Connect USB To A Car Stereo

The most common way of transferring data or music files from a mobile or a mp3 to a personal computer is by using a USB cable. The cable is used to pass the data from one device to another; the data can be music files also. Though USB is very common in the personal computer but it not very common in the radio present in the car. There are only a few radios which have these USB facilities.

But it is possible to connect a mp3 player to such radios using adapter cables. The cable allows us to connect the mp3 player in either of two ports. One of the ways is to connect using the radio\’s auxiliary port and the other way is by connecting the mp3 player to a cigar lighter. So it is very necessary that everyone to know how to use USB for a car stereo.

The first step in this process is to check the stereo thoroughly and make sure there is actually no USB port. It is a very small port measuring about half inches and quarter inch tall. The latest cars may have this port. There is a particular logo with trident near the port. If the car certainly does not have this port, check for the auxiliary port. This is present in most of the cars and is circular. It is used to connect the headphones.

The USB cable is connected between any mp3 player and USB port that is present in the car stereo. This is only when there is a USB port present already in the stereo. In this case, the controls of the stereo lets USB port are selected as the input device. If there is no USB port and instead have auxiliary port, the USB to auxiliary cable is connected between the stereo and the player. Then, the auxiliary jack is connected its corresponding port. There is also a representation for the auxiliary connection in order to differentiate it from other connections.

There will also be a logo printed next to it. In case this is not present then one has to use an AUX port in the place of an USB. It is very much similar to the port used to connect the ear piece of the mp3 player. This will be circular in shape.

Shift lock button is pushed downwards. This button can be identified near the handle of the shifter. Pressing it down, the shifter is moved till the lowest level of grade is attained. Now the compartment for storage which is present below is pulled out. The adapter is inserted into some power source inside the car like the lighter for cigar. It is with this adapter connection is made with the cable. Adjustment of radio is made till the music can be listened through radio when player is switched on

Two ten mm bolts which are located just below the controls of the heater are removed. Two dash vents which are present above the audio system are removed. Two ten mm bolts are removed which are already exposed. The weather controller set is pulled out carefully. Harness for wiring which is plugged to the radio at its back side is disconnected.

Now turn the radio on and tune to frequency with no transmission. The frequency of the radio is adjusted to match the AC adapter. When this happens the music from the mp3 will be played on the radio. So it is very essential for one to know how to use USB for a car stereo.

Learn more about Auto. Stop by Author Name\’s site where you can find out all about Car stereo and what it can do for you.